FAQs

Sink FAQs

What chemicals are bad for use on my stainless steel sink?

Chemicals, solvents and many household cleaners contain chlorides and acids which can react and damage stainless steel. Solutions of chlorine bleach, chlorides or citric acid found in many ordinary household cleaners can stain and corrode a stainless steel sink. Similarly, wipe up juices or acids from food immediately as they can contain citric acids which over time can etch the surface.

Do not allow liquid soaps or cleansers to dry on the sinks surface as they too can contain chemicals that can affect the high lustre of the sink.

How do I maintain my Spectra Sink?

Coloured sinks should only be cleaned with soapy water and a soft cloth or sponge, then rinsed and towelled dry. It is highly recommended to use the wire basin protector provided with the sink, to protect the bottom of the basin. See our 'Sink Care' page under 'Support' for more advice on caring for you Spectra Sink.

Will my stainless steel sink scratch?

Stainless steel sink will scratch. Surface scratches will become less noticeable as your sink ages, the first scratches will always be the most noticeable. Over time, the sink will develop it's own unique finish as light scratches blend in to the sink's grain. Oliveri recommends the use of a basin protector where possible to protect the basin from dents and heavy scratching.

Most minor scratches can be softened with a stainless steel polishing cream, rub with the grain, taking care not to rub in one area.

Is the Spectra Sink color guaranteed for lifetime?

 

The color of the sinks is guaranteed, however it is not guaranteed against scratching and general wear and tear. The coloring is a solid coating on the surface of the stainless steel only and therefore if scratched harshly enough raw stainless steel will show through. However, by our testing it is difficult to scratch these sinks without deliberate scratching.

How are the Spectra sinks colored and what is the process?

The coloring is achieved through a Physical Vapour Deposition (PVD). The solid coating material of the stainless steel is evaporated by heat, while at the same time a reactive gas is introduced and it forms a compound with the vapour which is deposited on the steel as a thin, highly adherent coating. This method is environmentally friendly due to its non-use of hazardous chemicals as opposed to other methods of coloring such as electroplating or painting.

How do I install my sink?

Refer to installation instructions provided on the product page for your sink model as well an experienced installer.

Can I install an garbage waste disposal with my sink?

Garbage waste disposal are suitable to be used with all of our stainless steel models.

Do stainless steel sinks rust?

No, stainless steel sinks do not rust, however they may appear to if they come into contact with contaminants. Rust marks in stainless steel sinks can usually be a result of one or more factors. These are some of the of the more common causes:

Steel wool pads: Often used for cleaning these will leave steel deposits on the sink which will cause rust marks to appear.
Ordinary steel containers, utensils or kitchen ware: Items like tin coated steel cans or pots can leave rust marks and stain the sink.
Iron deposits: Often found in water, iron particles left on the sinks surface can then leave rust marks.
Bleaches or chemicals: Solutions of chlorine bleach, chlorides or citric acid found in many ordinary household cleaners can stain and corrode a stainless steel sink.

Rust marks are caused by deposits on the sinks surface. We recommend lightly scrubbing the stains with a mild cleanser in the direction of the sink's grain. Particles need to be completely removed in order to stop them from returning. It is important to thoroughly dry the sink after cleaning. In cases where the problem is particularly persistent it may take several attempts to restore the sink to its pristine condition.

Why does Oliveri recommend that I dry my stainless steel sink after rinsing?

Water contains dissolved minerals and salts, when the water dries on the sink these minerals are left behind, causing deposits or water spots that are visible on your sink's finish. By drying your sink after rinsing, these spots are less likely to form. If you experience water spots or deposits, non-abrasive stainless steel cleaners or metal polishes will help to be rid of them. Wipe gently over the sink, in the same direction of the sink's grain.

What kind of stainless steel does Oliveri use?

All Oliveri Stainless Steel sinks are made from 304 grade stainless steel, also known as 18/10. These numbers simply illustrate the percentage of chromium and nickel content present in the stainless steel. For example, 18/10 stainless steel means there is approximately 18% chromium and 8-10% nickel. 

Which accessories are suited to my sink?

Accessories suited to your particular sink model will be listed as 'Included' or 'Matching' on the product page for your specific sink.